Differences

This shows you the differences between two versions of the page.

--- pijack:hat [2016/04/05 20:48] – [Docs] marcel
+++ pijack:hat [2016/10/11 10:00] (current) – marcel
@@ Line 4: / Line 4: @@
 {{https://www.raspberrypi.org/wp-content/uploads/2014/04/bplus-gpio.png}}
-====== Docs ======
+====== Flashing PiJack's EEPROM ======
 <code>
-#enable i2c using raspi-config
+sudo apt-get update
-apt-get install i2c-tools
+sudo apt-get install git
+# edit /boot/config.txt and add the following to the end of the file (in this order)
-/boot/config.txt (in this order!!)
 dtparam=i2c=on
 dtparam=i2c_vc=on
-dtoverlay=enc28j60
-EOF
-i2cdetect -a -y 0
-./eepmake pijack_settings.txt pijack.eep /boot/overlays/enc28j60-overlay.dtb
-./eepflash.sh -w -f=blank.eep -t=24c32
+# reboot pi
-hexdump /sys/class/i2c-adapter/i2c-0/0-0050/eeprom
-./eepflash.sh -w -f=pijack.eep -t=24c32
-hexdump /sys/class/i2c-adapter/i2c-0/0-0050/eeprom
-#see if hat is recognized
+# login as user pi
-cd /proc/device-tree/hat/
+cd && mkdir git
+cd git
+# change 'hecko'to your BitBucket account name
+git clone https://hecko@bitbucket.org/hotgluetech/pijack-production-tests.git
+cd pijack-production-tests/bin
+# 1 is serial number - written on every PiJack - serial number defines MAC address that will be generated for the device
+sudo ./make_dtb.py -s 1
 </code>