pijack:hat
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
pijack:hat [2016/08/15 16:55] marcel [Flashing PiJack's EEPROM] |
pijack:hat [2024/04/22 15:38] (current) |
||
|---|---|---|---|
| Line 7: | Line 7: | ||
| <code> | <code> | ||
| - | #enable i2c using raspi-config | ||
| - | raspi-config | ||
| - | |||
| sudo apt-get update | sudo apt-get update | ||
| - | sudo apt-get install i2c-tools git | + | sudo apt-get install git |
| # edit /boot/config.txt and add the following to the end of the file (in this order) | # edit /boot/config.txt and add the following to the end of the file (in this order) | ||
| dtparam=i2c=on | dtparam=i2c=on | ||
| dtparam=i2c_vc=on | dtparam=i2c_vc=on | ||
| - | dtoverlay=enc28j60 | ||
| # reboot pi | # reboot pi | ||
| Line 27: | Line 23: | ||
| cd pijack-production-tests/bin | cd pijack-production-tests/bin | ||
| # 1 is serial number - written on every PiJack - serial number defines MAC address that will be generated for the device | # 1 is serial number - written on every PiJack - serial number defines MAC address that will be generated for the device | ||
| - | sudo ./make_dtb.py -s 1 -v | + | sudo ./make_dtb.py -s 1 |
| </code> | </code> | ||
pijack/hat.1471280147.txt.gz ยท Last modified: 2024/04/22 15:38 (external edit)
Page Tools
